Use these procedures to troubleshoot the sliding roof system.
*: Use the Techstream.
| Proceed to |
|---|
| NEXT |
NEXT
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| Proceed to |
|---|
| NEXT |
NEXT
Using the Techstream, check if the LIN communication system is functioning normally.
| Result | Proceed to |
|---|---|
| LIN communication system DTC is not output | A |
| LIN communication system DTC is output | B |
A
B
Refer to the problem symptoms table.
Click hereVehicle Interior>SLIDING ROOF>SLIDING ROOF SYSTEM>PROBLEM SYMPTOMS TABLE
| Result | Proceed to |
|---|---|
| Fault is not listed in problem symptoms table | A |
| Fault is listed in problem symptoms table | B |
A
B
Operation Check
Click hereVehicle Interior>SLIDING ROOF>SLIDING ROOF SYSTEM>OPERATION CHECK
Initialization
Click hereVehicle Interior>SLIDING ROOF>SLIDING ROOF SYSTEM>INITIALIZATION
Terminals of ECU
Click hereVehicle Interior>SLIDING ROOF>SLIDING ROOF SYSTEM>TERMINALS OF ECU
Data List / Active Test
Click hereVehicle Interior>SLIDING ROOF>SLIDING ROOF SYSTEM>DATA LIST / ACTIVE TEST
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT