| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE UPPER PANEL | - | - | - | - |
| 2 | REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY | 84810D | ( )
|
- | - |
| *1 | REAR DOOR ARMREST BASE UPPER PANEL | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
1.REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE UPPER PANEL
84810D
2.REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the rear power window regulator switch assembly.