Home › Engine / Hybrid System › M15A-FKS (FUEL) › FUEL PRESSURE SENSOR (for High Pressure)
RM3700E _51 Engine / Hybrid System _093308 M15A-FKS FUEL _0440422 FUEL PRESSURE SENSOR(for High Pressure) A

M15A-FKS FUEL  FUEL PRESSURE SENSOR(for High Pressure)  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
A461489N02
0.667,2.667 1.333,2.833 0.667,0.167 0.625,2.625 1.375,2.875 0.75,0.25 1.948,1.833 2.281,1.833 false 2.583,3.219 2.583,3.469 false 2.135,3.042 1.833,3.417 1.833,3.417 1.667,3.417 false 1.333,2.75 1.667,2.75 false 6.469,0.271 6.802,0.271 false 6.385,0.75 6.719,0.75 false 6.344,1.167 6.677,1.167 false 1.823,2.656 2.135,2.854 0.313,0.198 10 false x2 0.719,2.667 1.302,2.823 0.583,0.156 8 false 10 (102, 7) 2.51,3.49 2.844,3.771 0.333,0.281 18 false 1 1.479,3.26 1.76,3.615 0.281,0.354 18 false 2 2.333,1.698 2.615,2.052 0.281,0.354 18 false 3 6.25,0.135 6.531,0.49 0.281,0.354 18 false 5 6.188,0.604 6.469,0.958 0.281,0.354 18 false 4 5.854,1.042 6.333,1.333 0.479,0.292 18 false 6, 7

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FUEL PRESSURE SENSOR 89458 (Click here) - -
2 NO. 1 FUEL PRESSURE SENSOR HOLDER 23851 (Click here) - -
3 INTAKE MANIFOLD 17111 - - -
4 CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL - - - -
5 INSPECT FOR FUEL LEAK - (Click here) - -
6 INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL - - - (Click here)
7 PERFORM INITIALIZATION - - - (Click here)

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - -

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 89458 1.INSTALL FUEL PRESSURE SENSOR

Z101186

NOTICE:

Perform "Inspection After Repair" after replacing the fuel pressure sensor.

Click here(Click here)



a.
A458697C02
3.354,0.594 2.885,0.594 true 4.646,0.792 4.333,0.958 true 2.688,0.49 2.875,0.667 0.188,0.177 10 true *a 4.667,0.698 4.885,0.875 0.219,0.177 10 true *b 0.458,0.073 0.667,0.333 0.208,0.26 18 true i
*a Cutout (Fuel Delivery Pipe) *b Cutout (Fuel Pressure Sensor)


i.

Temporarily install a new fuel pressure sensor to the fuel delivery pipe as shown in the illustration.

NOTICE:

Make sure that the cutout of the fuel delivery pipe is aligned with the cutout of the fuel pressure sensor.




Hide 23851 2.INSTALL NO. 1 FUEL PRESSURE SENSOR HOLDER

a.
A474491C02
1.646,0.604 1.375,0.604 true 3.198,0.865 2.865,1.104 true 0.469,0.063 0.75,0.417 0.281,0.354 18 false i 3.927,0.094 4.208,0.448 0.281,0.354 18 false ii 1.146,0.531 1.354,0.729 0.208,0.198 10 true *a 3.198,0.792 3.417,0.948 0.219,0.156 10 true *b 2,1.969 2.281,2.323 0.281,0.354 18 false iii
*a Cutout (Fuel Pressure Sensor) *b Cutout (No. 1 Fuel Pressure Sensor Holder)


i.

Temporarily install the No. 1 fuel pressure sensor holder to the fuel delivery pipe as shown in the illustration.

NOTICE:

Make sure that the cutout of the fuel pressure sensor is aligned with the cutout of the No. 1 fuel pressure sensor holder.



ii.

Using an 8 mm socket wrench, install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


iii.

Connect the fuel pressure sensor connector.



Hide 4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 6. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 7.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the fuel pressure sensor.

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION