| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FUEL MAIN VALVE ASSEMBLY | 23070 | ( )
|
- | - |
| 2 | NO. 2 FUEL SUCTION SUPPORT | - | - | - | - |
| 3 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | 77020A | - | - | - |
| ● | Non-reusable part | - | - |
23070
1.INSTALL FUEL MAIN VALVE ASSEMBLY
Apply gasoline to a new O-ring.
Install the spacer and O-ring to the fuel main valve assembly.
Install the fuel main valve assembly to the fuel suction with pump and gauge tube assembly.
Make sure that the O-ring is not cut or pinched during installation.
2.INSTALL NO. 2 FUEL SUCTION SUPPORT
77020A
3.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY