Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HV BATTERY
RM3700E _51 Engine / Hybrid System _093506 HYBRID / BATTERY CONTROL _0441190 HV BATTERY A

HYBRID / BATTERY CONTROL  HV BATTERY  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
A478808N01
4.229,1.958 5.229,2.125 1,0.167 5.958,0.333 6.958,0.5 1,0.167 3.625,2.438 4.292,2.604 0.667,0.167 0.167,3.271 0.833,3.438 0.667,0.167 4.635,4.26 4.969,4.26 false 0.521,2.792 0.854,2.792 false 1.354,0.875 1.688,0.875 false 5.333,5.167 5.583,5.167 false 2.01,1.865 2.26,1.865 false 6,2.594 6.104,2.51 6.104,2.51 6.25,2.51 false 6.083,1.427 6.083,1.594 false 5.625,0.417 5.958,0.417 false 5.604,2.615 5.375,2.042 5.375,2.042 5.229,2.042 false 0.844,3.354 1.177,3.354 false 5.969,3.323 5.969,3.521 false 4.302,2.521 4.552,2.521 false 5.344,4.125 5.625,4.479 0.281,0.354 18 false 1 0.292,2.646 0.573,3 0.281,0.354 18 false 2 1.771,0.74 2.052,1.094 0.281,0.354 18 false 3 5.958,4.99 6.24,5.344 0.281,0.354 18 false 4 1.823,1.729 2.104,2.083 0.281,0.354 18 false 5 6.594,2.427 6.875,2.781 0.281,0.354 18 false 6 6.052,3.563 6.333,3.917 0.281,0.354 18 false 6 6.167,1.646 6.448,2 0.281,0.354 18 false 7 5.646,0.438 5.938,0.667 0.292,0.229 10 false x3 5.677,2.615 5.969,2.844 0.292,0.229 10 false x5 4.292,1.958 5.271,2.115 0.979,0.156 8 false 7.5 (76, 66 in.*lbf) 0.198,3.271 1.177,3.427 0.979,0.156 8 false 19 (194, 14) 1.271,3.354 1.563,3.583 0.292,0.229 10 false x3 3.656,2.438 4.635,2.594 0.979,0.156 8 false 19 (194, 14) 6,0.333 6.979,0.49 0.979,0.156 8 false 7.5 (76, 66 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 HV BATTERY G9510 (Click here) - -
2 FLOOR WIRE 82161 - - -
3 HYBRID BATTERY HOSE ASSEMBLY G9290 - - -
4 FLOOR WIRE 82161 (Click here) - -
5 HV FLOOR UNDER WIRE 821H1 (Click here) - -
6 HV BATTERY UPPER COVER PANEL G92N1 (Click here) - -
7 BATTERY COOLING BLOWER ASSEMBLY G9230 (Click here) - -

V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -

A461207N12
3.667,2.49 4.417,2.656 0.75,0.167 3.625,2.448 4.458,2.698 0.833,0.25 3.448,4.521 3.781,4.521 false 6.49,0.292 6.823,0.292 false 4.042,0.552 4.375,0.552 false 4.573,1.656 5.323,1.656 false 0.5,0.417 1.667,0.417 false 1.083,0.917 1.083,0.417 false 1.313,3.552 1.646,3.552 false 3.583,3.615 3.917,3.615 false 4.729,2.896 4.583,2.583 4.583,2.583 4.417,2.583 false 3.146,4.406 3.698,4.76 0.552,0.354 18 false 13 4.448,0.406 5,0.76 0.552,0.354 18 false 12 6.146,0.146 6.698,0.5 0.552,0.354 18 false 14 5.417,1.531 5.969,1.885 0.552,0.354 18 false 11 3.396,3.469 3.948,3.823 0.552,0.354 18 false 8 1.75,3.417 2.302,3.771 0.552,0.354 18 false 9 3.74,2.5 4.427,2.698 0.688,0.198 8 false 30 (306, 22) 4.844,2.906 5.396,3.104 0.552,0.198 10 false x6 1.969,0.271 2.521,0.625 0.552,0.354 18 false 10 3.344,1.25 3.896,1.448 0.552,0.198 10 false ● 1.771,0.344 2.323,0.698 0.552,0.354 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

8 REAR SEAT CUSHION LEG SUB-ASSEMBLY 71033 - - -
9 REAR UNDER COVER 76971G - - -
10 REAR SEAT CUSHION LOCK HOOK 72693 - - -
11 BENCH TYPE REAR SEAT CUSHION ASSEMBLY - - - -
12 REAR CENTER SEAT OUTER BELT ASSEMBLY 73350C - - -
13 SERVICE PLUG GRIP G3834 - - -
14 PERFORM UTILITY - (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) ● Non-reusable part

PROCEDURE

Hide G9510 1.INSTALL HV BATTERY

Z101186

CAUTION:

Wear insulated gloves.


NOTICE:
·

Do not allow foreign matter, such as grease or oil, to adhere to the bolts of the HV battery.

·

To prevent the wire harness from being caught, make sure to bundle the wire harness using insulating tape or equivalent.

·

Use cardboard or another similar material to protect the HV battery and vehicle body from damage.

·

Since the HV battery is very heavy, 2 people are needed to install it. When installing the HV battery, be careful not to damage the parts around it.

·

When removing/installing/moving the HV battery, make sure not to tilt it more than 80°.

·

While lowering the HV battery into the vehicle, do not allow it to contact the vehicle.

·

As bolts with 2 different lengths are used, make sure to install each bolt to the correct position.

·

If the HV battery has been struck or dropped, replace it.




a.
A461655C01
4.802,0.479 5.156,0.708 true 5.865,1.104 6.177,1.552 true 4.563,0.385 4.781,0.583 0.219,0.198 10 true *a 6.26,1.5 6.573,1.698 0.313,0.198 10 false *b 0.51,0.063 0.823,0.417 0.313,0.354 18 false i
*a HV battery bracket *b Vehicle
V113147

Front of Vehicle - -


i.

Align the centers of the bolt holes on the HV battery bracket with the centers of the vehicle-side bolt holes as shown in the illustration.



b.
A461656C01
1.875,0.281 2.073,0.49 0.198,0.208 10 true *a 5.073,0.292 5.271,0.5 0.198,0.208 10 true *a 4.594,1.573 4.792,1.781 0.198,0.208 10 true *a 2.427,1.573 2.625,1.781 0.198,0.208 10 true *b 1.531,0.135 1.813,0.542 0.281,0.406 18 true i
*a Bolt (A)
(Bolt Length: 25 mm (0.984 in.))
*b Bolt (B)
(Bolt Length: 24 mm (0.945 in.))
V113147

Front of Vehicle - -


i.

Install the HV battery to the vehicle with the 3 bolts (A) and bolt (B).

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)



Hide 82161 2.CONNECT FLOOR WIRE

Z101186

CAUTION:

Wear insulated gloves.



a.

Connect the HV battery connector.


b.

Engage the clamp.


Hide G9290A 3.INSTALL HYBRID BATTERY HOSE ASSEMBLY

Hide 82161 4.CONNECT FLOOR WIRE

Z101186

CAUTION:

Wear insulated gloves.



Hide 821H1 5.CONNECT FLOOR UNDER WIRE

Z101186

CAUTION:

Wear insulated gloves.


NOTICE:

Make sure that the connectors are connected securely.



Hide G92N1 6.INSTALL HV BATTERY UPPER COVER PANEL

Z101186

CAUTION:

Wear insulated gloves.



a.
A461208C01
4.698,2.396 4.865,2.396 false 4.198,1.99 4.281,1.99 4.281,1.99 4.417,2.188 false 3.979,1.896 4.156,2.083 0.177,0.188 10 false *a 4.417,1.51 4.594,1.698 0.177,0.188 10 false *b 4.927,2.323 5.104,2.51 0.177,0.188 10 false *1 4.063,2.302 4.323,2.615 0.26,0.313 18 false ii 2.26,0.063 2.427,0.365 0.167,0.302 18 true i
*1 Battery Cover Lock Striker - -
*a Button *b Push


i.

Install the HV battery upper cover panel to the HV battery with the 5 nuts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


ii.

Install the battery cover lock striker, then push the button to lock it.



Hide G9230 7.INSTALL BATTERY COOLING BLOWER ASSEMBLY

Z101186

Click here(Click here)

Hide 71033 8.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

a.
A457851N02
4.656,1.552 4.813,1.75 0.156,0.198 10 true 2 2.271,1.375 2.427,1.573 0.156,0.198 10 true 1 2.583,0 2.74,0.198 0.156,0.198 10 true 3 3.115,0.031 3.271,0.229 0.156,0.198 10 true 4 3.885,0.125 4.042,0.323 0.156,0.198 10 true 5 4.698,0.188 4.854,0.385 0.156,0.198 10 true 6 2.177,0.083 2.333,0.385 0.156,0.302 18 true i

i.

Temporarily install the rear seat cushion leg sub-assembly with the 6 bolts.


ii.

Fully tighten the 6 bolts in the order shown in the illustration.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)



Hide 76971G 9.INSTALL REAR UNDER COVER

Hide 72693 10.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 11.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Hide 73350C 12.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Hide 14. PERFORM UTILITY

NOTICE:
·

Perform "Battery Status Info Update" after replacing the malfunctioning HV battery.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY

·

Perform "Prediagnostic Battery Charge" after replacing the malfunctioning HV battery.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY

·

Perform "Battery Diagnosis" after replacing the malfunctioning HV battery.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY