|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | - | - |
48818
1.INSTALL REAR STABILIZER BUSH
| *a | Cutout Faces | - | - |
|
Front of the Vehicle | - | - |
Install the 2 rear stabilizer bush to the rear stabilizer bar.
Be sure to install the rear stabilizer bush so that each cutout faces the front of the vehicle.
48832A
2.INSTALL REAR NO. 1 STABILIZER BAR BRACKET
| *a | Arrow Mark | - | - |
|
Front of the Vehicle | - | - |
Install the 2 rear No. 1 stabilizer bar brackets to the 2 rear stabilizer bush.
Be sure to install the rear No. 1 stabilizer bar brackets so that each arrow mark faces the front of the vehicle.
48812
3.INSTALL REAR STABILIZER BAR
| *a | Identification Mark | - | - |
Install the rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bush to the rear suspension member sub-assembly with the 4 bolts.
Ensure that the identification mark faces the right side of the vehicle.
Temporarily tighten bolt (A) and then fully tighten the 2 bolts in the order of (B) and (A).
48830
4.INSTALL REAR STABILIZER LINK ASSEMBLY (for LH Side)
|
|
48830
5.INSTALL REAR STABILIZER LINK ASSEMBLY (for RH Side)
6.INSTALL REAR WHEEL
7. STABILIZE SUSPENSION
48830
8.FULLY TIGHTEN REAR STABILIZER LINK ASSEMBLY (for LH Side)
|
|
48830
9.FULLY TIGHTEN REAR STABILIZER LINK ASSEMBLY (for RH Side)