Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE (for Intake Side)
RM3700E _51 Engine / Hybrid System _093766 M15A-FKS ENGINE CONTROL _0442015 CAMSHAFT OIL CONTROL VALVE(for Intake Side) G

M15A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Intake Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

Hide 135A0 2.INSPECT CAMSHAFT TIMING GEAR BOLT

a.
A463880C01
1,1.667 1.167,1.667 1.167,1.667 1.656,1.094 true 0.792,1.573 0.979,1.781 0.188,0.208 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing gear bolt.

Standard Stroke:
Specified Condition
4.5 mm or higher
0.177 in. or higher


HINT:

When pressing the plunger, there may be a stepped feeling. This is not a malfunction.


If the result is not as specified, replace the camshaft timing gear bolt.


Hide 15370 3.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)