Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER › 2020.08–2021.07
RM3700E _54 Brake _093767 BRAKE SYSTEM (OTHER) _0442064 BRAKE MASTER CYLINDER A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C442458N02
6.563,0.188 6.896,0.188 false 4.729,0.5 5.063,0.5 false 4.917,1.333 5.25,1.333 false 5.958,2.417 6.292,2.417 false 2.604,1.667 2.938,1.667 false 2.833,4.292 3.167,4.292 false 2.167,5.5 2.677,5.5 false 1.135,3.333 1.469,3.333 false 2.906,3.448 3.083,2.583 3.083,2.583 3.25,2.583 false 4.531,0.354 4.813,0.708 0.281,0.354 18 false 1 5.75,2.281 6.031,2.635 0.281,0.354 18 false 3 2.354,1.521 2.635,1.875 0.281,0.354 18 false 4 6.354,0.021 6.635,0.375 0.281,0.354 18 false 5 1.917,5.333 2.198,5.688 0.281,0.354 18 false 6 3.51,4.135 3.792,4.49 0.281,0.354 18 false 7 0.854,3.167 1.135,3.521 0.281,0.354 18 false 8 3.51,2.438 3.792,2.792 0.281,0.354 18 false 9 3.333,2.49 3.49,2.688 0.156,0.198 10 false ● 3.375,1.094 3.833,1.292 0.458,0.198 10 false x12 1.26,3.844 1.719,4.042 0.458,0.198 10 false x2 5.323,1.188 5.604,1.542 0.281,0.354 18 false 2

Procedure Part Name Code
Z101186

Z101188

Z101187

1 WINDSHIELD WIPER MOTOR AND LINK - - - -
2 FRONT NO. 1 VENTILATOR SEAL 55815E - - -
3 WATER GUARD PLATE LH 55735A - - -
4 OUTER COWL TOP PANEL SUB-ASSEMBLY 55701J - - -
5 DRAIN BRAKE FLUID - - (Click here) -
6 NO. 2 FRONT BRAKE TUBE 47312 (Click here) - -
7 NO. 1 FRONT BRAKE TUBE 47311 (Click here) - -
8 BRAKE MASTER CYLINDER SUB-ASSEMBLY 47201 (Click here) - -
9 BRAKE MASTER O-RING 47201B - - -

● Non-reusable part - -

CAUTION / NOTICE / HINT

NOTICE:

Make sure to release vacuum from the brake booster assembly before removing the master cylinder sub-assembly from the brake booster assembly.


PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK

Hide 55815E 2.REMOVE FRONT NO. 1 VENTILATOR SEAL

Hide 55735A 3.REMOVE WATER GUARD PLATE LH

Hide 55701J 4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

Hide 5.DRAIN BRAKE FLUID

Z101186

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.



Hide 47312 6.SEPARATE NO. 2 FRONT BRAKE TUBE

a.
C442459N01
0.344,0 0.625,0.354 0.281,0.354 18 false i

i.

Using a union nut wrench, disconnect the No. 2 front brake tube from the brake master cylinder sub-assembly.

NOTICE:
·

Do not damage or deform the brake lines during the removal procedure.

·

Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.





Hide 47311 7.SEPARATE NO. 1 FRONT BRAKE TUBE

a.
C442460N01
0.333,0.01 0.615,0.333 0.281,0.323 18 false i

i.

Using a union nut wrench, disconnect the No. 1 front brake tube from the brake master cylinder sub-assembly.

NOTICE:
·

Do not damage or deform the brake lines during the removal procedure.

·

Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.





Hide 47201 8.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

a.
C442461N01
0.073,0.083 0.385,0.385 0.313,0.302 18 true i 4.031,0.042 4.344,0.344 0.313,0.302 18 true ii

i.

Disconnect the reservoir level switch connector.


ii.

Remove the 2 nuts and brake master cylinder sub-assembly from the brake booster assembly.

NOTICE:
·

The brake master cylinder sub-assembly requires careful handling. Do not drop or subject the brake master cylinder sub-assembly to any impact. Do not reuse a brake master cylinder sub-assembly that has been dropped.

·

Do not hold the brake master cylinder sub-assembly by the master cylinder piston. Hold the brake master cylinder sub-assembly by its body or its brake master cylinder reservoir assembly when carrying it.

·

Do not pull out the master cylinder piston.

·

Do not strike or pinch the master cylinder piston, or cause any damage to the master cylinder piston by any other means.

·

When installing the brake master cylinder sub-assembly to the brake booster assembly, or when removing the brake master cylinder sub-assembly from the brake booster assembly, make sure that the brake master cylinder sub-assembly is kept horizontal or with its tip facing downward (the master cylinder piston is facing upward) to prevent the master cylinder piston from falling out.

·

Do not allow any foreign matter to contaminate the master cylinder piston. If any foreign matter gets on the master cylinder piston, remove it by using a piece of cloth and then apply an even layer of lithium soap base glycol grease around the circumference (sliding part) of the master cylinder piston.

·

Do not use any other type of grease or fluid.

·

Make sure to release vacuum from the brake booster assembly before removing the brake master cylinder sub-assembly from the brake booster assembly.





Hide 47201B 9.REMOVE BRAKE MASTER O-RING

a.
C429833