| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | ENGINE UNDER COVER RH | 51441C | - | - | - |
| 2 | OIL PRESSURE AND TEMPERATURE SENSOR | 89448D | ( )
|
- | - |
| ★ | Precoated part | - | - |
51441C
1.REMOVE ENGINE UNDER COVER RH
Use the same procedure described for the LH side.
Click hereSuspension>FRONT SUSPENSION>FRONT SUSPENSION MEMBER>REMOVAL
89448D
2.REMOVE OIL PRESSURE AND TEMPERATURE SENSOR
Disconnect the oil pressure and temperature sensor connector.
Using a 24 mm deep socket wrench, remove the oil pressure and temperature sensor.
If the oil pressure and temperature sensor is dropped or subjected to a strong impact, replace it with a new one.