|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
89491
1.INSTALL ENGINE OIL LEVEL SENSOR
Using an 8 mm socket wrench, install the engine oil level sensor to the stiffening crankcase assembly with the 2 bolts.
Apply a small amount of engine oil to the O-ring of the engine oil level sensor.
Install a new clip to the engine oil level sensor.
Connect the engine oil level sensor connector.
3.ADD ENGINE OIL
4.INSPECT FOR ENGINE OIL LEAK
5.CHECK ENGINE OIL LEVEL
51410
6.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY