| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | POWER BACK DOOR SENSOR ASSEMBLY | 84280D | - | - | - |
| 2 | POWER BACK DOOR UNIT SET ASSEMBLY | 68920 | ( )
|
- | - |
| 3 | BACK DOOR TRIM BOARD | 67751 | - | - | - |
| 4 | INSPECT POWER BACK DOOR SYSTEM | - | ( )
|
- | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
84280D
1.INSTALL POWER BACK DOOR SENSOR ASSEMBLY
Engage the claw and install the 4 grommets.
Install the power back door sensor assembly with the 2 clips.
Install the power back door sensor assembly with the 4 screws.
Connect the connector.
68920
2.INSTALL POWER BACK DOOR UNIT SET ASSEMBLY
67751
3.INSTALL BACK DOOR TRIM BOARD
4.INSPECT POWER BACK DOOR SYSTEM