Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)
RM3700E _58 Vehicle Interior _092990 SEAT _0446771 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
B600124N01
1.208,2.375 1.875,2.542 0.667,0.167 1.167,2.333 1.917,2.583 0.75,0.25 6.5,0.271 6.833,0.271 false 0.802,3.656 1.135,3.656 false 1.875,2.458 2.208,2.458 false 6.406,0.573 6.74,0.573 false 6.448,0.906 6.781,0.906 false 4.667,0.583 5,0.583 false 4.792,2.031 5.125,2.031 false 5.99,3.438 6.323,3.438 false 1.438,4.167 1.771,4.167 false 5.26,2.969 5.594,2.969 false 2.031,2.26 2.344,2.458 0.313,0.198 10 false x4 5.688,0.125 6.573,0.479 0.885,0.354 18 false 4, 5, 6 5.677,2.844 5.958,3.198 0.281,0.354 18 false 8 6.396,3.313 6.677,3.667 0.281,0.354 18 false 7 0.479,3.542 0.917,3.875 0.438,0.333 18 false 10 1.26,4.042 1.542,4.396 0.281,0.354 18 false 9 5.458,1.927 5.74,2.281 0.281,0.354 18 false 1 1.24,2.375 1.906,2.573 0.667,0.198 8 false 37 (377, 27) 6.198,0.458 6.563,0.792 0.365,0.333 18 false 3 6.26,0.792 6.542,1.146 0.281,0.354 18 false 2 5.031,0.458 5.469,0.792 0.438,0.333 18 false 11

Procedure Part Name Code
Z101186

Z101188

Z101187

1 FRONT SEAT ASSEMBLY - (Click here) - -
2 CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL - - - -
3 INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL - - - (Click here)
4 PERFORM DIAGNOSTIC SYSTEM CHECK - (Click here) - -
5 INSPECT FRONT SEAT ASSEMBLY - (Click here) - -
6 INSPECT SRS WARNING LIGHT - (Click here) - -
7 SEAT TRACK BRACKET INNER COVER RH 72157A - - -
8 SEAT TRACK BRACKET OUTER COVER RH 72137 - - -
9 FRONT SEAT TRACK BRACKET INNER COVER RH 72127A - - -
10 FRONT SEAT TRACK BRACKET OUTER COVER RH 72123A - - -
11 FRONT SEAT HEADREST ASSEMBLY 71910A - - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - -

CAUTION / NOTICE / HINT

CAUTION:
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY

a.
B585819N01
0.396,0.01 0.667,0.344 0.271,0.333 18 false i

i.

Place the front seat assembly in the cabin.

NOTICE:
·

2 or more people are required when reinstalling the front seat assembly into the vehicle.

·

Protect the front seat leg.

·

Be careful not to damage the front seat assembly, body exterior or body interior.





b.
B598478N01
0.104,0.104 0.688,0.448 0.583,0.344 18 false i, ii 3.688,2.01 3.969,2.333 0.281,0.323 18 false vii 1.844,3.979 2.302,4.271 0.458,0.292 18 true viii 3.302,0.073 4.552,0.469 1.25,0.396 18 false iii, v, vi 0.208,1.938 1.094,2.271 0.885,0.333 18 true iv

i.

Connect the front seat airbag assembly connector under the front seat assembly.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>HOW TO CONNECT OR DISCONNECT AIRBAG CONNECTOR

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



ii.

Engage the clamps and connect the 2 connectors under the front seat assembly.


iii.

Insert the 2 location pins of the front seat assembly through the 2 body holes, place the front seat assembly and make sure that the inner and outer seat tracks are locked securely.


iv.

Connect the cable to the negative (-) auxiliary battery terminal.



v.

Operate the slide and vertical power seat switch knob to move the front seat assembly to the rearmost position.


vi.

Temporarily install the 2 bolts on the front side of the front seat assembly.


vii.

Operate the slide and vertical power seat switch knob to move the front seat assembly to the foremost position.


viii.

Temporarily install the 2 bolts on the rear side of the front seat assembly.



c.
B598479N01
2.646,1.26 2.802,1.458 0.156,0.198 10 false 2 0.927,1.542 1.083,1.74 0.156,0.198 10 false 1 4.833,1.188 4.99,1.385 0.156,0.198 10 false 2 5.646,1.188 5.802,1.385 0.156,0.198 10 false 1 0.375,0.042 0.823,0.313 0.448,0.271 18 false i, ii 3.542,0.042 4.188,0.313 0.646,0.271 18 false iii, iv

i.

Operate the slide and vertical power seat switch knob to move the front seat assembly to the rearmost position.


ii.

Using a T50 "TORX" socket wrench, tighten the 2 bolts on the front side of the front seat assembly in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


iii.

Operate the slide and vertical power seat switch knob to move the front seat assembly to the foremost position.


iv.

Using a T50 "TORX" socket wrench, tighten the 2 bolts on the rear side of the front seat assembly in the order shown in the illustration.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



Hide 2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 3. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


Hide 4. PERFORM DIAGNOSTIC SYSTEM CHECK

Z101186

Click here(Click here)

Hide 5.INSPECT FRONT SEAT ASSEMBLY

Z101186

Click here(Click here)

Hide 6.INSPECT SRS WARNING LIGHT

Z101186

Click here(Click here)

Hide 72157A 7.INSTALL SEAT TRACK BRACKET INNER COVER RH

Hide 72137 8.INSTALL SEAT TRACK BRACKET OUTER COVER RH

Hide 72127A 9.INSTALL FRONT SEAT TRACK BRACKET INNER COVER RH

Hide 72123A 10.INSTALL FRONT SEAT TRACK BRACKET OUTER COVER RH

Hide 71910A 11.INSTALL FRONT SEAT HEADREST ASSEMBLY