| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FORWARD RECOGNITION CAMERA | 8646C | - | - | - |
| 2 | FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY | 86401 | ( )
|
- | - |
8646C
1.REMOVE FORWARD RECOGNITION CAMERA
86401
2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
|
|
| *a | Clamp | *b | Guide |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disconnect the connector.
Disengage the clamp.
Disengage the guides in the order shown in the illustration.
Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the claws.
Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) shown in the illustration to disengage the guides and remove the forward recognition with heater hood sub-assembly.
|
Inner Surface of Forward Recognition with Heater Hood Sub-assembly |
Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.