CHECK POWER DISTRIBUTION BOX ASSEMBLY
Remove the power distribution box assembly.
for LHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
for RHD:
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for RHD)>REMOVAL
Reconnect the power distribution box assembly connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| 4G-1 - Body ground | Power source | Ignition switch off | 11 to 14 V |
| 4C-25 - Body ground | Ground | Always | Below 1 Ω |
| 4B-6 - Body ground*1 | Seat heater switch LH signal | ·
Ignition switch ON ·
Seat heater switch LH off |
Below 1 Ω |
·
Ignition switch ON ·
Seat heater switch LH on |
11 to 14 V | ||
| 4B-7 - Body ground*1 | Seat heater switch RH signal | ·
Ignition switch ON ·
Seat heater switch RH off |
Below 1 Ω |
·
Ignition switch ON ·
Seat heater switch RH on |
11 to 14 V | ||
| 4C-39 - Body ground | Seat heater LH drive signal*1 | Seat heater LH is not operating | Below 1 Ω |
| Seat heater LH is operating | 11 to 14 V | ||
| Seat heater LH drive signal*2 | Ignition switch off | Below 1 Ω | |
| Ignition switch ON | 11 to 14 V | ||
| 4C-40 - Body ground | Seat heater RH drive signal*1 | Seat heater RH is not operating | Below 1 Ω |
| Seat heater RH is operating | 11 to 14 V | ||
| Seat heater RH drive signal*2 | Ignition switch off | Below 1 Ω | |
| Ignition switch ON | 11 to 14 V |
*1: for ON/OFF Type Seat Heater
*2: for HI/LO Type Seat Heater
CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for Automatic Air Conditioning System HV Model)
Disconnect the H24 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H24-5 (B) - H24-17 (GND) | Power source | Ignition switch off | 11 to 14 V |
| H24-6 (IG+) - H24-17 (GND) | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| H24-17 (GND) - Body ground | Ground for main power supply | Always | Below 1 Ω |
| H24-26 (SHIN) - H24-17 (GND) | Driver side seat heater switch operation signal | ·
Ignition switch ON ·
Seat heater switch off |
Below 1 V |
·
Ignition switch ON ·
Seat heater switch on |
11 to 14 V |