|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
33530F
1.INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY
33820B
2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
| *a | Stopper | *b | Lock Piece |
| *c | Adjuster Case | - | - |
|
Install in this Direction | - | - |
Release the lock of the transmission control select cable length adjustment structure.
Twist the stopper.
Pull the lock piece outward from the adjuster case to release the lock.
Return the stopper.
Engage the 2 claws to connect the transmission control cable assembly to the floor shift shift lever assembly.
Do not forcibly pull the transmission control cable assembly into the cabin.
Connect the transmission control shift cable to the floor shift shift lever assembly.
Connect the transmission control select cable to the floor shift shift lever assembly and install the clip.
Make sure that the lock piece of the transmission control select cable length adjustment structure is facing upward when the transmission control select cable is connected.
Make sure that the transmission control select cable is securely installed.
33820B
3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY
58910C
4.INSTALL REAR CONSOLE BOX ASSEMBLY