1.SECURE VEHICLE
Fully apply the parking brake and chock a wheel.
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
33554
2.REMOVE SHIFT LEVER CAP
|
|
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the shift lever cap from the position indicator housing.
58910C
4.REMOVE REAR CONSOLE BOX ASSEMBLY
33820B
5.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
Move the shift lever to N.
| *1 | Lock Nut | - | - |
| *a | Counterclockwise | - | - |
Disconnect the transmission control cable assembly from the transmission floor shift assembly.
Rotate the lock nut counterclockwise approximately 180° and, while holding the lock nut in that position, disconnect the transmission control cable assembly from the transmission floor shift assembly.
Do not rotate the lock nut excessively as the interior spring may come off and the transmission control cable assembly will not be reusable.
6.REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
| *A | w/ Sequential Shift | - | - |