| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY | 55606 | - | - | - |
| 2 | STOP LIGHT SWITCH ASSEMBLY | 84340 | - | - | - |
| 3 | STOP LIGHT SWITCH MOUNTING ADJUSTER | 84345 | ( )
|
- | - |
| ● | Non-reusable part | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55606
1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
84340
2.REMOVE STOP LIGHT SWITCH ASSEMBLY
|
Remove in this Direction | - | - |
84345
3.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER
Using a screwdriver, disengage the claw to remove the stop light switch mounting adjuster.
The stop light switch mounting adjuster must not be reused.