|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
F1334
1.INSTALL NO. 1 CONVERTER CONTROL BRACKET
| *a | Temporarily Tighten | - | - |
Temporarily install the No. 1 converter control bracket to the eco run vehicle converter assembly.
Install the 2 bolts in the order shown in the illustration.
G92C0A
2.INSTALL ECO RUN VEHICLE CONVERTER ASSEMBLY
| *a | Temporarily Tighten | *b | Lock Lever |
Install the eco run vehicle converter assembly with the bolt and nut in the order shown in the illustration.
Connect the eco run vehicle converter assembly connector and move the lock lever as shown in the illustration to lock the connector.
3.INSTALL FRONT BUMPER ASSEMBLY
4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART