| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | TRANSMISSION REVOLUTION SENSOR | 89413B | ( )
|
- | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
|
Gear Oil |
|
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent | ● | Non-reusable part |
| ★ | Precoated part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 2 | AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE | - | - | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
89413B
1.INSTALL TRANSMISSION REVOLUTION SENSOR
| *a | Adhesive | - | - |
|
Gear Oil | - | - |
Coat a new O-ring with gear oil and install it to the transmission revolution sensor.
Ensure that the O-ring is not twisted.
Apply adhesive to the bolt.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Make sure to install the bolt immediately after applying adhesive to prevent foreign matter from attaching to it.
Install the transmission revolution sensor to the manual transaxle assembly with the bolt.
Be careful not to damage the O-ring.
Connect the transmission revolution sensor connector.
2.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
w/ Stop and Start System:
Click hereEngine / Hybrid System>M15A-FKS (STARTING)>STARTER (w/ Stop And Start System)>INSTALLATION
w/o Stop and Start System:
Click hereEngine / Hybrid System>M15A-FKS (STARTING)>STARTER (w/o Stop And Start System)>INSTALLATION