| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL | - | - | - | - |
| 2 | POWER WINDOW REGULATOR SWITCH ASSEMBLY | 84810 | ( )
|
- | - |
| *1 | FRONT ARMREST BASE UPPER PANEL LH | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL
84810
2.REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the power window regulator switch assembly.