| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | METER MIRROR SUB-ASSEMBLY | 83108 | ( )
|
- | - |
| 2 | NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY | 55084E | - | - | - |
| 3 | INSTRUMENT PANEL SUB-ASSEMBLY | 55302C | - | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
83108
1.INSTALL METER MIRROR SUB-ASSEMBLY
for LHD:
Install the meter mirror sub-assembly with the 2 nuts and bolt in the order shown in the illustration.
Connect the connector.
for RHD:
Engage the guide to install the meter mirror sub-assembly.
Install the 2 nuts and bolt in the order shown in the illustration.
Engage the clamp.
Connect the connector.
55084E
2.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
55302C
3.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY