| *A | w/ USB Charger | *B | for CVT |
| *C | for Manual Transaxle | - | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55475B
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
55431A
2.REMOVE INSTRUMENT PANEL FINISH PANEL
55432B
3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
55407B
4.REMOVE SWITCH HOLE BASE SUB-ASSEMBLY
33504F
5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
33504F
6.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
58810J
8.REMOVE CONSOLE BOX ASSEMBLY
85530
9.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the No. 1 power outlet socket assembly.
85535B
10.REMOVE NO. 1 POWER OUTLET SOCKET COVER
85532
11.REMOVE USB CHARGER SOCKET (w/ USB Charger)
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the USB charger socket.