33554
2.REMOVE SHIFT LEVER CAP
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the shift lever cap from the position indicator housing.
When removing the shift lever cap, if the screwdriver is lowered in the direction opposite to the one shown in the illustration, the cap could be damaged as a result.
Be careful not to damage the shift lever cap and position indicator housing.
Using a screwdriver with its tip wrapped with protective tape, push the shift lock release button to move the shift lever to N.
Be careful not to damage the transmission floor shift assembly.
58910C
4.REMOVE REAR CONSOLE BOX ASSEMBLY
33820B
5.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
|
|
| *1 | Lock Nut | - | - |
| *a | Counterclockwise | - | - |
Disconnect the end of the transmission control cable assembly from the shift lever assembly.
Rotate the lock nut counterclockwise approximately 180° and, while holding the lock nut in that position, disconnect the transmission control cable assembly from the transmission floor shift assembly.
Do not rotate the lock nut excessively as the interior spring may come off and the transmission control cable assembly will not be reusable.
6.REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
for LHD:
for RHD: