| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | AIR DUCT ASSEMBLY | 87220 | - | - | - |
| 2 | FRONT PANEL SILENCER | 55211B | ( )
|
- | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 3 | NO. 1 COOLER THERMISTOR | 88625 | ( )
|
- | - |
| 4 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY | 88501 | - | - | - |
| 5 | HEATER RADIATOR UNIT SUB-ASSEMBLY | 87107A | - | - | - |
| 6 | HEATER CLAMP | 87124B | - | - | - |
| *1 | UPPER HEATER CASE | - | - |
| *A | for Automatic Air Conditioning System | *B | for Manual Air Conditioning System |
| *C | for Cold Area Specification Vehicles | *D | except Cold Area Specification Vehicles |
| *A | for Automatic Air Conditioning System | *B | except Cold Area Specification Vehicles |
| *C | for Cold Area Specification Vehicles | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
|
for Gasoline Model (for HFC-134a(R134a)):
Compressor oil ND-OIL 8 or equivalent for Gasoline Model (for HFO-1234yf(R1234yf)): Compressor oil ND-OIL 12 or equivalent for HV Model: Compressor oil ND-OIL 11 or equivalent |
- | - |
87220
1.INSTALL AIR DUCT ASSEMBLY
88501
4.INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
87107A
5.INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
87124B
6.INSTALL HEATER CLAMP
87710G
7.INSTALL QUICK HEATER ASSEMBLY (for Cold Area Specification Vehicles)
87114B
8.INSTALL HEATER COVER (except Cold Area Specification Vehicles)
87114B
9.INSTALL HEATER COVER (for Cold Area Specification Vehicles)
55909A
10.INSTALL AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
55906A
11.INSTALL DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
87050C
12.INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
87130D
13.INSTALL BLOWER ASSEMBLY
82143C
14.INSTALL NO. 3 INSTRUMENT PANEL WIRE (for Cold Area Specification Vehicles)
88650N
15.INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
82210K
16.INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)
88539J
17.INSTALL DRAIN COOLER HOSE
| *a | Rib | *b | Hose Notch |
Align the hose notch with the rib as shown in the illustration and install the drain cooler hose.
88482A
18.INSTALL COVER (except Cold Area Specification Vehicles)
87212K
19.INSTALL NO. 6 REAR AIR DUCT (for Cold Area Specification Vehicles)
87211A
20.INSTALL NO. 2 AIR DUCT
|
|
88897P
21.INSTALL ASPIRATOR
88515
22.INSTALL COOLER EXPANSION VALVE
Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.
for Gasoline Model (for HFC-134a(R134a)):
ND-OIL 8 or equivalent
for Gasoline Model (for HFO-1234yf(R1234yf)):
ND-OIL 12 or equivalent
for HV Model:
ND-OIL 11 or equivalent
Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.
Keep the O-rings and O-ring fitting surfaces free of foreign matter.
Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.
88897K
23.INSTALL COOLER PIPE GROMMET
55990B
24.INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY