The following DTCs are stored when a malfunction occurs in the skid control ECU (brake actuator assembly).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|---|
| C059704 | Brake System Control Module "A" System Internal Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
| C059746 | Brake System Control Module "A" Calibration / Parameter Memory Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
| C060B49 | Left Electric Parking Brake Actuator Control Internal Electronic Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
| C061049 | Right Electric Parking Brake Actuator Control Internal Electronic Failure | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
| C13CF1C | Left Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
| C13D41C | Right Electric Parking Brake Actuator Current Sensor Circuit Voltage Out of Range | Skid control ECU (brake actuator assembly) internal malfunction | Skid control ECU (brake actuator assembly) | DTC stored | Brake/EPB | A | An electric parking brake system malfunction is displayed on the multi-information display. |
To ensure that the electric parking brake does not operate, wait for 4 minutes or more with the ignition switch off, the driver door closed, and the brake pedal not depressed, then disconnect each connector, fuse and relay.
After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.
When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch assembly as the parking brake indicator light blinks when the ignition switch is first turned to ON.
Check the vehicle specification.
| Result | Proceed to |
|---|---|
| for LHD | A |
| for RHD | B |
A
B
| Proceed to |
|---|
| NEXT |
NEXT
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for HV Model TMMF Made RHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT