Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made) › from 2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0483557 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF Made)  C13C012  Brake Pressure Control Solenoid "A" Control Circuit Short to Battery  C13C014  Brake Pressure Control Solenoid "A" Control Circuit Short to Ground or Open  C13C01C  Brake Pressure Control Solenoid "A" Control Circuit Voltage Out of Range  C13C01E  Brake Pressure Control Solenoid "A" Control Circuit Resistance Out of Range  C13C049  Brake Pressure Control Solenoid "A" Control Internal Electronic Failure  C13C912  Brake Pressure Control Solenoid "B" Control Circuit Short to Battery  C13C914  Brake Pressure Control Solenoid "B" Control Circuit Short to Ground or Open  C13C91C  Brake Pressure Control Solenoid "B" Control Circuit Voltage Out of Range  C13C91E  Brake Pressure Control Solenoid "B" Control Circuit Resistance Out of Range  C13C949  Brake Pressure Control Solenoid "B" Control Internal Electronic Failure  


DESCRIPTION

The ABS solenoid relay and master cylinder cut solenoid valves are built into the brake actuator assembly.

Depending on the operating conditions, the master cylinder cut solenoid valves regulate the brake fluid pressure generated by the pump motor.

When this DTC is stored, the fail-safe function operates and the ABS solenoid relay is turned off to prevent the master cylinder cut solenoid valves from operating.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C13C012 Brake Pressure Control Solenoid "A" Control Circuit Short to Battery A short to +B in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C014 Brake Pressure Control Solenoid "A" Control Circuit Short to Ground or Open An open or short in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C01C Brake Pressure Control Solenoid "A" Control Circuit Voltage Out of Range
·

A current leak in the master cylinder cut solenoid circuit is detected during the self test.

·

The master cylinder cut solenoid valve operation request signal and master cylinder cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake/EPB A
C13C01E Brake Pressure Control Solenoid "A" Control Circuit Resistance Out of Range An abnormal resistance in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C049 Brake Pressure Control Solenoid "A" Control Internal Electronic Failure An internal malfunction in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C912 Brake Pressure Control Solenoid "B" Control Circuit Short to Battery A short to +B in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C914 Brake Pressure Control Solenoid "B" Control Circuit Short to Ground or Open An open or short in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C91C Brake Pressure Control Solenoid "B" Control Circuit Voltage Out of Range
·

A current leak in the master cylinder cut solenoid circuit is detected during the self test.

·

The master cylinder cut solenoid valve operation request signal and master cylinder cut solenoid valve operation feedback signal do not match for a certain period of time.


Skid control ECU (brake actuator assembly) Brake/EPB A
C13C91E Brake Pressure Control Solenoid "B" Control Circuit Resistance Out of Range An abnormal resistance in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A
C13C949 Brake Pressure Control Solenoid "B" Control Internal Electronic Failure An internal malfunction in the master cylinder cut solenoid circuit is detected during the self test. Skid control ECU (brake actuator assembly) Brake/EPB A

CAUTION / NOTICE / HINT

NOTICE:

After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF Made)>UTILITY


PROCEDURE

1.CHECK VEHICLE
a.

Check the vehicle specification.


Result:
Result Proceed to
for LHD A
for RHD B



A

2.REPLACE BRAKE ACTUATOR ASSEMBLY

B

3.REPLACE BRAKE ACTUATOR ASSEMBLY
2.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END

3.REPLACE BRAKE ACTUATOR ASSEMBLY

NEXT

END