Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM (for HV Model) › from 2021.07
RM3700E _57 Power Source / Network _093026 NETWORKING _0445204 CAN COMMUNICATION SYSTEM(for HV Model) J

NETWORKING  CAN COMMUNICATION SYSTEM(for HV Model)  Main Body ECU Communication Stop Mode  


DESCRIPTION

Detection Item Symptom Trouble Area
Main Body ECU Communication Stop Mode Communication stop for "Main Body" is indicated on the "Communication Bus Check" screen of the GTS.
Click here(Click here)
·

Main body ECU (multiplex network body ECU) main line or connector

·

Power source circuit of main body ECU (multiplex network body ECU) or power distribution box assembly

·

Main body ECU (multiplex network body ECU) or power distribution box assembly ground circuit

·

Main body ECU (multiplex network body ECU) or power distribution box assembly



WIRING DIAGRAM

for TMC Made with Entry and Start System



C434124E13
5.49,0.917 5.74,1.115 0.25,0.198 10 false H4 5.813,1.406 6.427,1.604 0.615,0.198 10 false CANL 5.823,0.813 6.438,1.01 0.615,0.198 10 false CANH 5.479,1.531 5.729,1.729 0.25,0.198 10 false H4 0.156,1.875 0.76,2.083 0.604,0.208 10 false O114 0.146,2.031 3.073,2.24 2.927,0.208 10 false No. 12 Global CAN Junction Connector 1.552,1.396 1.802,1.594 0.25,0.198 10 false 10 1.583,0.802 1.833,1 0.25,0.198 10 false 4 5.521,0.698 5.771,0.896 0.25,0.198 10 false 2 5.51,1.292 5.76,1.49 0.25,0.198 10 false 1 5.5,3.094 5.75,3.292 0.25,0.198 10 false 26 5.469,3.323 5.833,3.542 0.365,0.219 10 false MB 5.844,3.302 6.458,3.5 0.615,0.198 10 false BECU 5.844,4.125 6.458,4.323 0.615,0.198 10 false IGR 5.49,3.917 5.74,4.115 0.25,0.198 10 false 27 4.365,4.302 5.448,4.51 1.083,0.208 10 false ECU-IGR NO. 2 3.552,4.885 4.635,5.094 1.083,0.208 10 false IGR-NO. 2 2.75,3.323 3,3.521 0.25,0.198 10 false 4D 2.76,3.104 3.01,3.302 0.25,0.198 10 false 23 2.74,4.156 2.99,4.354 0.25,0.198 10 false 4H 2.781,3.938 3.031,4.135 0.25,0.198 10 false 1 2.74,4.385 2.99,4.583 0.25,0.198 10 false 11 2.74,4.604 2.99,4.802 0.25,0.198 10 false 4B 0.344,4.615 1.708,5.292 1.365,0.677 10 false from Certification ECU (Smart Key ECU Assembly) 5.833,5.698 6.448,5.896 0.615,0.198 10 false GND1 5.833,6.302 6.448,6.5 0.615,0.198 10 false GND2 5.458,5.479 5.708,5.677 0.25,0.198 10 false 13 5.469,6.073 5.719,6.271 0.25,0.198 10 false 14 2.75,5.708 3,5.906 0.25,0.198 10 false 4B 2.74,5.479 2.99,5.677 0.25,0.198 10 false 36 2.75,6.073 3,6.271 0.25,0.198 10 false 41 2.75,6.302 3,6.5 0.25,0.198 10 false 4C 3.094,7 5.188,7.24 2.094,0.24 10 false Power Distribution Box Assembly 5.5,7 7.156,7.479 1.656,0.479 10 false Main Body ECU (Multiplex Network Body ECU) 0.396,3.302 1.958,3.552 1.563,0.25 10 false from Auxiliary Battery 5.469,4.146 5.833,4.365 0.365,0.219 10 false MB 5.458,5.719 5.823,5.938 0.365,0.219 10 false MB 5.469,6.313 5.833,6.531 0.365,0.219 10 false MB 4.365,3.51 5.448,3.719 1.083,0.208 10 false ECU-DCC NO. 2 0.396,4.146 1.958,4.396 1.563,0.25 10 false from Auxiliary Battery

for TMC Made without Entry and Start System



C434124E14
5.49,0.917 5.74,1.115 0.25,0.198 10 false H4 5.813,1.396 6.427,1.594 0.615,0.198 10 false CANL 5.813,0.813 6.427,1.01 0.615,0.198 10 false CANH 5.49,1.51 5.74,1.708 0.25,0.198 10 false H4 0.156,1.875 0.635,2.063 0.479,0.188 10 false O114 0.146,2.031 3.073,2.24 2.927,0.208 10 false No. 12 Global CAN Junction Connector 1.552,1.396 1.802,1.594 0.25,0.198 10 false 10 1.573,0.813 1.823,1.01 0.25,0.198 10 false 4 5.51,0.688 5.76,0.885 0.25,0.198 10 false 2 5.51,1.271 5.76,1.469 0.25,0.198 10 false 1 5.479,3.083 5.729,3.281 0.25,0.198 10 false 26 5.469,3.323 5.833,3.542 0.365,0.219 10 false MB 5.844,3.323 6.458,3.521 0.615,0.198 10 false BECU 5.844,4.146 6.458,4.344 0.615,0.198 10 false IGR 5.49,3.906 5.74,4.104 0.25,0.198 10 false 27 4.365,4.302 5.448,4.51 1.083,0.208 10 false ECU-IGR NO. 2 3.552,4.885 4.635,5.094 1.083,0.208 10 false IGR-NO. 2 2.75,3.313 3,3.51 0.25,0.198 10 false 4D 2.74,3.083 2.99,3.281 0.25,0.198 10 false 23 2.74,4.146 2.99,4.344 0.25,0.198 10 false 4H 2.771,3.927 3.021,4.125 0.25,0.198 10 false 1 2.74,4.375 2.99,4.573 0.25,0.198 10 false 17 2.74,4.594 2.99,4.792 0.25,0.198 10 false 4C 0.292,4.594 1.708,5.313 1.417,0.719 10 false from Ignition or Starter Switch Assembly 5.833,5.719 6.448,5.917 0.615,0.198 10 false GND1 5.833,6.323 6.448,6.521 0.615,0.198 10 false GND2 5.469,5.479 5.719,5.677 0.25,0.198 10 false 13 5.469,6.063 5.719,6.26 0.25,0.198 10 false 14 2.75,5.698 3,5.896 0.25,0.198 10 false 4B 2.75,5.479 3,5.677 0.25,0.198 10 false 36 2.74,6.063 2.99,6.26 0.25,0.198 10 false 41 2.75,6.292 3,6.49 0.25,0.198 10 false 4C 3.083,6.99 5.177,7.219 2.094,0.229 10 false Power Distribution Box Assembly 5.5,7 7.156,7.479 1.656,0.479 10 false Main Body ECU (Multiplex Network Body ECU) 0.365,3.302 1.927,3.552 1.563,0.25 10 false from Auxiliary Battery 5.458,4.135 5.823,4.354 0.365,0.219 10 false MB 5.458,5.708 5.823,5.927 0.365,0.219 10 false MB 5.469,6.292 5.833,6.51 0.365,0.219 10 false MB 4.365,3.51 5.448,3.719 1.083,0.208 10 false ECU-DCC NO. 2 0.354,4.146 1.917,4.396 1.563,0.25 10 false from Auxiliary Battery

for TMMF Made without Power Back Door and Adaptive High Beam System


C434124E17
5.49,0.917 5.74,1.115 0.25,0.198 10 false H4 5.813,1.406 6.427,1.604 0.615,0.198 10 false CANL 5.823,0.813 6.438,1.01 0.615,0.198 10 false CANH 5.479,1.531 5.729,1.729 0.25,0.198 10 false H4 0.156,1.875 0.76,2.083 0.604,0.208 10 false H114 0.146,2.031 3.073,2.24 2.927,0.208 10 false No. 3 Global CAN Junction Connector 1.552,1.396 1.802,1.594 0.25,0.198 10 false 13 1.583,0.802 1.833,1 0.25,0.198 10 false 2 5.521,0.698 5.771,0.896 0.25,0.198 10 false 2 5.51,1.292 5.76,1.49 0.25,0.198 10 false 1 5.5,3.094 5.75,3.292 0.25,0.198 10 false 26 5.469,3.323 5.833,3.542 0.365,0.219 10 false MB 5.844,3.302 6.458,3.5 0.615,0.198 10 false BECU 5.844,4.125 6.458,4.323 0.615,0.198 10 false IGR 5.49,3.917 5.74,4.115 0.25,0.198 10 false 27 4.365,4.302 5.448,4.51 1.083,0.208 10 false ECU-IGR NO. 2 3.552,4.885 4.635,5.094 1.083,0.208 10 false IGR-NO. 2 2.75,3.323 3,3.521 0.25,0.198 10 false 4D 2.76,3.104 3.01,3.302 0.25,0.198 10 false 23 2.74,4.156 2.99,4.354 0.25,0.198 10 false 4H 2.781,3.938 3.031,4.135 0.25,0.198 10 false 1 2.75,4.375 3,4.573 0.25,0.198 10 false 17 2.74,4.604 2.99,4.802 0.25,0.198 10 false 4C 0.333,4.583 1.719,5.271 1.385,0.688 10 false from Ignition or Starter Switch Assembly 5.833,5.698 6.448,5.896 0.615,0.198 10 false GND1 5.833,6.302 6.448,6.5 0.615,0.198 10 false GND2 5.458,5.479 5.708,5.677 0.25,0.198 10 false 13 5.469,6.073 5.719,6.271 0.25,0.198 10 false 14 2.75,5.708 3,5.906 0.25,0.198 10 false 4B 2.74,5.479 2.99,5.677 0.25,0.198 10 false 36 2.75,6.073 3,6.271 0.25,0.198 10 false 41 2.75,6.302 3,6.5 0.25,0.198 10 false 4C 3.094,7 5.188,7.24 2.094,0.24 10 false Power Distribution Box Assembly 5.5,7 7.156,7.479 1.656,0.479 10 false Main Body ECU (Multiplex Network Body ECU) 0.396,3.302 1.958,3.552 1.563,0.25 10 false from Auxiliary Battery 5.469,4.146 5.833,4.365 0.365,0.219 10 false MB 5.458,5.719 5.823,5.938 0.365,0.219 10 false MB 5.469,6.313 5.833,6.531 0.365,0.219 10 false MB 4.365,3.51 5.448,3.719 1.083,0.208 10 false ECU-DCC NO. 2 0.385,4.146 1.948,4.396 1.563,0.25 10 false from Auxiliary Battery


for TMMF Made with Power Back Door or Adaptive High Beam System


C434124E18
5.49,0.917 5.74,1.115 0.25,0.198 10 false H4 5.813,1.406 6.427,1.604 0.615,0.198 10 false CANL 5.823,0.813 6.438,1.01 0.615,0.198 10 false CANH 5.479,1.531 5.729,1.729 0.25,0.198 10 false H4 0.156,1.875 0.76,2.083 0.604,0.208 10 false O114 0.146,2.031 3.073,2.24 2.927,0.208 10 false No. 12 Global CAN Junction Connector 1.552,1.396 1.802,1.594 0.25,0.198 10 false 10 1.583,0.802 1.833,1 0.25,0.198 10 false 4 5.521,0.698 5.771,0.896 0.25,0.198 10 false 2 5.51,1.292 5.76,1.49 0.25,0.198 10 false 1 5.5,3.094 5.75,3.292 0.25,0.198 10 false 26 5.469,3.323 5.833,3.542 0.365,0.219 10 false MB 5.844,3.302 6.458,3.5 0.615,0.198 10 false BECU 5.844,4.125 6.458,4.323 0.615,0.198 10 false IGR 5.49,3.917 5.74,4.115 0.25,0.198 10 false 27 4.365,4.302 5.448,4.51 1.083,0.208 10 false ECU-IGR NO. 2 3.552,4.885 4.635,5.094 1.083,0.208 10 false IGR-NO. 2 2.75,3.323 3,3.521 0.25,0.198 10 false 4D 2.76,3.104 3.01,3.302 0.25,0.198 10 false 23 2.74,4.156 2.99,4.354 0.25,0.198 10 false 4H 2.781,3.938 3.031,4.135 0.25,0.198 10 false 1 2.74,4.385 2.99,4.583 0.25,0.198 10 false 11 2.74,4.604 2.99,4.802 0.25,0.198 10 false 4B 0.344,4.615 1.708,5.292 1.365,0.677 10 false from Certification ECU (Smart Key ECU Assembly) 5.833,5.698 6.448,5.896 0.615,0.198 10 false GND1 5.833,6.302 6.448,6.5 0.615,0.198 10 false GND2 5.458,5.479 5.708,5.677 0.25,0.198 10 false 13 5.469,6.073 5.719,6.271 0.25,0.198 10 false 14 2.75,5.708 3,5.906 0.25,0.198 10 false 4B 2.74,5.479 2.99,5.677 0.25,0.198 10 false 36 2.75,6.073 3,6.271 0.25,0.198 10 false 41 2.75,6.302 3,6.5 0.25,0.198 10 false 4C 3.094,7 5.188,7.24 2.094,0.24 10 false Power Distribution Box Assembly 5.5,7 7.156,7.479 1.656,0.479 10 false Main Body ECU (Multiplex Network Body ECU) 0.396,3.302 1.958,3.552 1.563,0.25 10 false from Auxiliary Battery 5.469,4.146 5.833,4.365 0.365,0.219 10 false MB 5.458,5.719 5.823,5.938 0.365,0.219 10 false MB 5.469,6.313 5.833,6.531 0.365,0.219 10 false MB 4.365,3.51 5.448,3.719 1.083,0.208 10 false ECU-DCC NO. 2 0.396,4.146 1.958,4.396 1.563,0.25 10 false from Auxiliary Battery 0.135,0.063 4.906,0.302 4.771,0.24 12 false w/ Entry and Start System:

C434124E19
5.49,0.917 5.74,1.115 0.25,0.198 10 false H4 5.813,1.396 6.427,1.594 0.615,0.198 10 false CANL 5.813,0.813 6.427,1.01 0.615,0.198 10 false CANH 5.49,1.51 5.74,1.708 0.25,0.198 10 false H4 0.156,1.875 0.635,2.063 0.479,0.188 10 false O114 0.146,2.031 3.073,2.24 2.927,0.208 10 false No. 12 Global CAN Junction Connector 1.552,1.396 1.802,1.594 0.25,0.198 10 false 10 1.573,0.813 1.823,1.01 0.25,0.198 10 false 4 5.51,0.688 5.76,0.885 0.25,0.198 10 false 2 5.51,1.271 5.76,1.469 0.25,0.198 10 false 1 5.479,3.083 5.729,3.281 0.25,0.198 10 false 26 5.469,3.323 5.833,3.542 0.365,0.219 10 false MB 5.844,3.323 6.458,3.521 0.615,0.198 10 false BECU 5.844,4.146 6.458,4.344 0.615,0.198 10 false IGR 5.49,3.906 5.74,4.104 0.25,0.198 10 false 27 4.365,4.302 5.448,4.51 1.083,0.208 10 false ECU-IGR NO. 2 3.552,4.885 4.635,5.094 1.083,0.208 10 false IGR-NO. 2 2.75,3.313 3,3.51 0.25,0.198 10 false 4D 2.74,3.083 2.99,3.281 0.25,0.198 10 false 23 2.74,4.146 2.99,4.344 0.25,0.198 10 false 4H 2.771,3.927 3.021,4.125 0.25,0.198 10 false 1 2.74,4.375 2.99,4.573 0.25,0.198 10 false 17 2.74,4.594 2.99,4.792 0.25,0.198 10 false 4C 0.292,4.594 1.708,5.313 1.417,0.719 10 false from Ignition or Starter Switch Assembly 5.833,5.719 6.448,5.917 0.615,0.198 10 false GND1 5.833,6.323 6.448,6.521 0.615,0.198 10 false GND2 5.469,5.479 5.719,5.677 0.25,0.198 10 false 13 5.469,6.063 5.719,6.26 0.25,0.198 10 false 14 2.75,5.698 3,5.896 0.25,0.198 10 false 4B 2.75,5.479 3,5.677 0.25,0.198 10 false 36 2.74,6.063 2.99,6.26 0.25,0.198 10 false 41 2.75,6.292 3,6.49 0.25,0.198 10 false 4C 3.083,6.99 5.177,7.219 2.094,0.229 10 false Power Distribution Box Assembly 5.5,7 7.156,7.479 1.656,0.479 10 false Main Body ECU (Multiplex Network Body ECU) 0.365,3.302 1.927,3.552 1.563,0.25 10 false from Auxiliary Battery 5.458,4.135 5.823,4.354 0.365,0.219 10 false MB 5.458,5.708 5.823,5.927 0.365,0.219 10 false MB 5.469,6.292 5.833,6.51 0.365,0.219 10 false MB 4.365,3.51 5.448,3.719 1.083,0.208 10 false ECU-DCC NO. 2 0.354,4.146 1.917,4.396 1.563,0.25 10 false from Auxiliary Battery 0.094,0.073 5.052,0.313 4.958,0.24 12 false w/o Entry and Start System:


CAUTION / NOTICE / HINT

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.


NOTICE:
·

Because the order of diagnosis is important to allow correct diagnosis, make sure to begin troubleshooting using How to Proceed with Troubleshooting when CAN communication system related DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING

·

Before measuring the resistance of the CAN bus, turn the ignition switch off and leave the vehicle for 1 minute or more without operating the key or any switches, or opening or closing the doors. After that, disconnect the cable from the negative (-) auxiliary battery terminal and leave the vehicle for 1 minute or more before measuring the resistance.

·

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>BEFORE DISCONNECTING BATTERY

·

When disconnecting and reconnecting the auxiliary battery.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


·

Some parts must be initialized and set when replacing or removing and installing parts.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE

·

After performing repairs, perform the DTC check procedure and confirm that the DTCs are not output again.

DTC check procedure: Turn the ignition switch to ON and wait for 1 minute or more.

Then operate the suspected malfunctioning system and drive the vehicle at 60 km/h (37 mph) or more for 5 minutes or more.

·

After the repair, perform the CAN bus check and check that all the ECUs and sensors connected to the CAN communication system are displayed as normal.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM

·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*1

*1: w/ Entry and Start System




HINT:
·

Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.

·

When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.



PROCEDURE

1.CHECK FOR OPEN IN CAN BUS LINES (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) MAIN LINE)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the H4 main body ECU (multiplex network body ECU) connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H4)Location & Routing

Click Connector(H4)Instrument Panel>Instrument Panel Wire / Speaker Wire>Main Body ECU

H4-2 (CANH) - H4-1 (CANL) Cable disconnected from negative (-) auxiliary battery terminal 108 to 132 Ω



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)

NG

REPAIR OR REPLACE CAN BRANCH LINES OR CONNECTOR (MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))

2.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
a.

b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
MB-13 (GND1) - Body ground Cable disconnected from negative (-) auxiliary battery terminal Below 1 Ω
MB-14 (GND2) - Body ground Cable disconnected from negative (-) auxiliary battery terminal Below 1 Ω


NOTICE:

Perform this inspection with the wire harness connected to the power distribution box assembly.



c.

Reconnect the cable to the negative (-) auxiliary battery terminal.


d.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
MB-26 (BECU) - Body ground Ignition switch off 11 to 14 V
MB-27 (IGR) - Body ground Ignition switch ON 11 to 14 V
MB-27 (IGR) - Body ground Ignition switch off Below 1 V


NOTICE:

Perform this inspection with the wire harness connected to the power distribution box assembly.



Result:
Result Proceed to
OK A
NG (BECU) B
NG (IGR) C
NG (GND1) D
NG (GND2) E



A

B

3.CHECK HARNESS AND CONNECTOR (BECU SIGNAL CIRCUIT)

C

GO TO LIGHTING (INT) SYSTEM (IG SIGNAL CIRCUIT)

D

4.CHECK HARNESS AND CONNECTOR (GROUND CIRCUIT)

E

5.CHECK HARNESS AND CONNECTOR (GROUND CIRCUIT)
3.CHECK HARNESS AND CONNECTOR (BECU SIGNAL CIRCUIT)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the 4D power distribution box assembly connector.


c.

Reconnect the cable to the negative (-) auxiliary battery terminal.


d.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
4D-23 - Body ground Ignition switch off 11 to 14 V



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (BECU SIGNAL CIRCUIT)

4.CHECK HARNESS AND CONNECTOR (GROUND CIRCUIT)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the 4B power distribution box assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4B-36 - Body ground Cable disconnected from negative (-) auxiliary battery terminal Below 1 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)

5.CHECK HARNESS AND CONNECTOR (GROUND CIRCUIT)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the 4C power distribution box assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4C-41 - Body ground Cable disconnected from negative (-) auxiliary battery terminal Below 1 Ω



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)