Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM19S0E _51 Engine / Hybrid System _051448 1NZ-FE ENGINE CONTROL _0248041 CAMSHAFT OIL CONTROL VALVE A

1NZ-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 11212 1.REMOVE NO. 2 CYLINDER HEAD COVER

a.
A116235

Remove the 4 nuts and No. 2 cylinder head cover.


Hide 11101J 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A116177

Disconnect the camshaft timing oil control valve assembly connector.


b.
A116178

Remove the bolt and camshaft timing oil control valve assembly.


c.

Remove the O-ring from the camshaft timing oil control valve assembly.