78110K
1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for LHD)
Install the accelerator pedal sensor assembly with the 2 bolts.
Do not disassemble the accelerator or subjected to a strong impact, replace it.
If a component has been dropped or subjected to a strong impact, replace it.
Connect the connector of the accelerator pedal sensor assembly.
78110K
2.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for RHD)
Install the accelerator pedal sensor assembly with the 2 bolts.
Do not disassemble the accelerator or subjected to a strong impact, replace it.
If a component has been dropped or subjected to a strong impact, replace it.
Connect the connector of the accelerator pedal sensor assembly.