Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › MASS AIR FLOW METER
RM19S0E _51 Engine / Hybrid System _051448 1NZ-FE ENGINE CONTROL _0248045 MASS AIR FLOW METER A

1NZ-FE ENGINE CONTROL  MASS AIR FLOW METER  REMOVAL  


PROCEDURE

Hide 22204 1.REMOVE MASS AIR FLOW METER

a.

Disengage the wire harness clamp.


b.
A248720

Disconnect the connector of the mass air flow meter.


c.

Remove the 2 screws and the mass air flow meter.

NOTICE:

If a component has been dropped or subjected to a strong impact, replace it.



d.
A115141

Remove the O-ring.