Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › KNOCK SENSOR
RM19S0E _51 Engine / Hybrid System _051448 1NZ-FE ENGINE CONTROL _0248050 KNOCK SENSOR G

1NZ-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A093606E24
0.073,0.063 0.26,0.26 0.188,0.198 10 false *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Knock Sensor)

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.