Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › HEATED OXYGEN SENSOR(for Sensor 2) › 2011.08–2016.09
RM19S0E _51 Engine / Hybrid System _051448 1NZ-FE ENGINE CONTROL _0248052 HEATED OXYGEN SENSOR(for Sensor 2) A

1NZ-FE ENGINE CONTROL  HEATED OXYGEN SENSOR(for Sensor 2)  REMOVAL  


PROCEDURE

Hide 58910C 1.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 89465A 2.REMOVE HEATED OXYGEN SENSOR (for Sensor 2)

a.
A250513

Disconnect the heated oxygen sensor connector.


b.

Remove the oxygen sensor wire grommet and pass the connector through the hole to the outside of the vehicle.


c.
A247793E01
1.994,0.273 2.102,0.273 false 1.876,0.623 1.994,0.273 1.994,0.273 2.102,0.273 false 2.108,0.185 2.645,0.398 0.537,0.213 10 SST

Using SST, remove the heated oxygen sensor.

SST
09224-00010  

NOTICE:

Do not damage the heated oxygen sensor.