Home › Engine / Hybrid System › 1NZ-FE ENGINE CONTROL › INTEGRATION RELAY
RM19S0E _51 Engine / Hybrid System _051448 1NZ-FE ENGINE CONTROL _0248053 INTEGRATION RELAY A

1NZ-FE ENGINE CONTROL  INTEGRATION RELAY  REMOVAL  


PROCEDURE

Hide 82662A 1.REMOVE ENGINE ROOM MAIN RELAY BLOCK COVER

Hide 82641 2.REMOVE NO. 1 INTEGRATION RELAY

a.
A250507E02
0.922,3.764 1.092,3.925 0.170,0.161 10 *1 1.16,2.521 1.024,3.738 false

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 1 integration relay.

Text in Illustration
*1 Protective Tape


b.

Disconnect the 3 connectors.