Home › Engine / Hybrid System › 1NZ-FE ENGINE MECHANICAL › ENGINE UNIT
RM19S0E _51 Engine / Hybrid System _051450 1NZ-FE ENGINE MECHANICAL _0248079 ENGINE UNIT A

1NZ-FE ENGINE MECHANICAL  ENGINE UNIT  INSTALLATION  


PROCEDURE

Hide 1.INSTALL WIRE HARNESS CLAMP BRACKET

a.
A107284E03
1.042,0.635 1.198,0.823 0.156,0.188 10 true A 2.042,1.01 2.167,1.208 0.125,0.198 10 true B

Install the 2 wire harness clamp brackets with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 44763 2.INSTALL BOOSTER VACUUM TUBE

a.

Install the booster vacuum tube with the 2 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 16268 3.INSTALL NO. 1 WATER BY-PASS PIPE

a.

Install the No. 1 water by-pass pipe through a new gasket with the 2 bolts and 2 nuts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)