Home › Engine / Hybrid System › 1NZ-FE COOLING › THERMOSTAT
RM19S0E _51 Engine / Hybrid System _051458 1NZ-FE COOLING _0248123 THERMOSTAT A

1NZ-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket onto the thermostat.


b.
A116188E08
1.698,1 2.552,0.802 true 1.25,0.25 1.563,0.427 0.313,0.177 10 true 10° 1.844,0.25 2.156,0.427 0.313,0.177 10 true 10° 2.594,0.729 2.76,0.896 0.167,0.167 10 false *1

Install the thermostat with the jiggle valve facing upward.

Text in Illustration
*1 Jiggle Valve

HINT:

The jiggle valve may be set within 10° of vertical in either direction, as shown in the illustration.



Hide 16321 2.INSTALL WATER INLET

A116186

a.

Install the water inlet with radiator hose with the 2 nuts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)