Home › Engine / Hybrid System › 1NZ-FE COOLING › RADIATOR
RM19S0E _51 Engine / Hybrid System _051458 1NZ-FE COOLING _0248126 RADIATOR A

1NZ-FE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL RADIATOR DRAIN COCK

a.

Install the radiator drain cock onto the radiator assembly.


Hide 16470E 2.INSTALL GROMMET

a.

Install the 2 grommets onto the radiator assembly.


Hide 16523A 3.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions onto the radiator assembly.


Hide 16711 4.INSTALL FAN SHROUD

A248117

a.

Engage the 2 claws and install the fan shroud.


Hide 16572D 5.INSTALL NO. 2 RADIATOR HOSE

a.

Install No. 2 radiator hose with the clip.


Hide 16400 6.INSTALL RADIATOR ASSEMBLY

a.
A248118

Engage the 2 claws and install the radiator assembly onto the vehicle.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or piping when installing the radiator assembly.



b.

Connect the cooling fan motor connector and wire harness clamp.


Hide 7.INSTALL INLET OIL COOLER HOSE (for Automatic Transaxle)

Hide 8.INSTALL OUTLET OIL COOLER HOSE (for Automatic Transaxle)

Hide 16572D 9.CONNECT NO. 2 RADIATOR HOSE

A248686E05
1.479,2.615 1.281,2.354 true 2.052,1.469 2.26,1.698 0.208,0.229 12 false A 0.385,2.219 0.594,2.448 0.208,0.229 10 false *a 1.677,2.146 1.885,2.375 0.208,0.229 10 false *b 0.646,2.719 0.854,2.948 0.208,0.229 10 false *c 2.073,3.094 2.281,3.323 0.208,0.229 10 false *d 1.125,2.208 1.271,2.385 0.146,0.177 10 false *e

a.

Connect No. 2 radiator hose with the clip.

Text in Illustration
*a View A
*b Upper Side
*c RH Side
*d 180°
*e Yellow Mark


Hide 16573B 10.INSTALL NO. 3 RADIATOR HOSE

A248687E05
0.552,2.958 0.552,3.208 true 2.385,2.656 2.135,2.656 true 1.208,1.521 1.344,1.708 0.135,0.188 10 false A 0.156,2.167 0.323,2.323 0.167,0.156 10 false *a 3,0.969 3.135,1.156 0.135,0.188 10 false B 0.833,2.208 0.99,2.396 0.156,0.188 10 false *c 0.042,2.927 0.198,3.115 0.156,0.188 10 false *d 3.146,2.802 3.302,2.99 0.156,0.188 10 false *e 1.313,2.573 1.469,2.76 0.156,0.188 10 false *f 2.917,2.99 3.073,3.177 0.156,0.188 10 false *g 0.49,3.219 0.646,3.406 0.156,0.188 10 false *h 1.969,2.563 2.125,2.75 0.156,0.188 10 false *i 2.49,2.208 2.646,2.396 0.156,0.188 10 false *c 1.813,2.198 1.979,2.354 0.167,0.156 10 false *b

a.

Install No. 3 radiator hose with the 2 clips.

Text in Illustration
*a View A
*b View B
*c Upper Side
*d LH Side
*e RH Side
*f 225°
*g 90°
*h Paint Mark
*i Blue Mark


Hide 11.CONNECT RADIATOR RESERVOIR TANK HOSE

a.

Connect the radiator reservoir tank hose to the water filler.


Hide 53205 12.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper radiator support sub-assembly with the 4 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Connect the horn assembly connector.


c.

Connect the hood courtesy switch connector and engage the harness clamps.


Hide 53630 13.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Install the hood lock control cable assembly and engage the 2 clamps.


Hide 14.INSTALL COOLING FAN MOTOR CONNECTOR

Hide 16.INSTALL HEADLIGHT ASSEMBLY