Home › Engine / Hybrid System › 2NZ-FE COOLING › WATER PUMP
RM19S0E _51 Engine / Hybrid System _051459 2NZ-FE COOLING _0248131 WATER PUMP G

2NZ-FE COOLING  WATER PUMP  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 51441C 1.REMOVE ENGINE UNDER COVER RH

Hide 16100 3.INSPECT ENGINE WATER PUMP ASSEMBLY

a.

Turn the pulley and check that the water pump bearing moves smoothly and quietly.

If necessary, replace the engine water pump assembly.


b.

Make sure that there are no drops of coolant on the water pump housing.

If necessary, replace the engine water pump assembly.


Hide 51441C 5.INSTALL ENGINE UNDER COVER RH