Home › Engine / Hybrid System › 2NZ-FE COOLING › COOLING FAN MOTOR
RM19S0E _51 Engine / Hybrid System _051459 2NZ-FE COOLING _0248133 COOLING FAN MOTOR A

2NZ-FE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 2.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 5.CONNECT RADIATOR RESERVOIR TANK HOSE