Home › Engine / Hybrid System › 2NZ-FE COOLING › COOLING FAN MOTOR
RM19S0E _51 Engine / Hybrid System _051459 2NZ-FE COOLING _0248133 COOLING FAN MOTOR A

2NZ-FE COOLING  COOLING FAN MOTOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Be sure that the ignition is off if you work near the electric cooling fans or radiator grille. With the ignition on, the electric cooling fans may automatically start to run if the engine coolant temperature is high and/or the air conditioning is on.


PROCEDURE

Hide 3.DISCONNECT RADIATOR RESERVOIR TANK HOSE

Hide 16573B 4.REMOVE NO. 3 RADIATOR HOSE

Hide 16361 6.REMOVE FAN

a.
A171259

Remove the nut and the fan.


Hide 16363 7.REMOVE COOLING FAN MOTOR

a.
A248174

Remove the 3 screws and the cooling fan motor.