Home › Engine / Hybrid System › 1NZ-FE STARTING › IGNITION SWITCH › from 2014.07
RM19S0E _51 Engine / Hybrid System _051462 1NZ-FE STARTING _0248147 IGNITION SWITCH A

1NZ-FE STARTING  IGNITION SWITCH  REMOVAL  


PROCEDURE

Hide 45250 1.REMOVE STEERING COLUMN ASSEMBLY

Hide 84450 2.REMOVE IGNITION OR STARTER SWITCH ASSEMBLY

NOTICE:
·

Perform the operation after situating the upper steering column bracket assembly in such a way that the ignition or starter switch assembly faces upward, as shown in the illustration.

·

Do not turn the upper steering column bracket assembly sideways or downward because doing so might release the upper steering column bracket assembly's component parts.



A250755E01
2.031,0.747 2.246,0.401 false 2.287,0.285 2.511,0.449 0.224,0.165 10 *1

Text in Illustration
*1 Ignition or Starter Switch Assembly

a.
A248261

Disconnect the connector.


b.

Disengage the 2 claws and remove the ignition or starter switch assembly.