Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SPEED SENSOR
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248158 SPEED SENSOR A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR  REMOVAL  


PROCEDURE

Hide 74431 2.REMOVE BATTERY TRAY

Hide 74411 3.REMOVE BATTERY CARRIER (for LHD)

A259809

a.

Disengage the 6 wire harness clamps and separate the wire harness from the battery carrier.


b.

Remove the 5 bolts and the battery carrier.


Hide 89413B 5.REMOVE TRANSMISSION REVOLUTION SENSOR

a.
C117098

Disconnect the transmission revolution sensor connector.


b.

Remove the bolt and the transmission revolution sensor from the automatic transaxle assembly.


c.
C117099E03
1.865,1.875 2.115,1.875 false 2.188,1.792 2.385,1.99 0.198,0.198 10 false *1

Remove the O-ring from the transmission revolution sensor.

Text in Illustration
*1 O-ring