Home › Drivetrain › U441E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SPEED SENSOR(w/o ABS)
RM19S0E _52 Drivetrain _051466 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0248172 SPEED SENSOR(w/o ABS) A

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR(w/o ABS)  INSTALLATION  


PROCEDURE

Hide 89413B 1.INSTALL TRANSMISSION REVOLUTION SENSOR

a.

Coat a new O-ring with Toyota Genuine ATF Type T-IV and install it to the transmission revolution sensor.


b.

Install the transmission revolution sensor to the automatic transaxle assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.

Connect the transmission revolution sensor connector.


Hide 83181G 2.INSTALL SPEEDOMETER SENSOR

a.

Coat a new O-ring with Toyota Genuine ATF Type T-IV and install it to the speedometer sensor.


b.

Install the speedometer driven gear to the speedometer sensor with the E-ring.


c.

Install the speedometer sensor to the automatic transaxle assembly with the bolt.

Torque:
11 N*m (115 kgf*cm, 8 in.*lbf)


d.

Connect the speedometer sensor connector.


Hide 74411 3.INSTALL BATTERY CARRIER (for LHD)

a.

Install the battery carrier with the 5 bolts.

Torque:
17 N*m (173 kgf*cm, 13 ft.*lbf)


b.

Engage the 6 wire harness clamps and install the wire harness.


Hide 74431 5.INSTALL BATTERY TRAY

Hide 7.INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK