Home › Drivetrain › U441E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SPEED SENSOR(w/o ABS)
RM19S0E _52 Drivetrain _051466 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0248172 SPEED SENSOR(w/o ABS) A

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR(w/o ABS)  REMOVAL  


PROCEDURE

Hide 74431 2.REMOVE BATTERY TRAY

Hide 74411 3.REMOVE BATTERY CARRIER (for LHD)

A259809

a.

Disengage the 6 wire harness clamps and separate the wire harness from the battery carrier.


b.

Remove the 5 bolts and the battery carrier.


Hide 89413B 5.REMOVE TRANSMISSION REVOLUTION SENSOR

a.
U158283

Disconnect the transmission revolution sensor connector.


b.

Remove the bolt and the transmission revolution sensor from the automatic transaxle assembly.


c.
C117099E03
1.865,1.875 2.115,1.875 false 2.188,1.792 2.385,1.99 0.198,0.198 10 false *1

Remove the O-ring from the transmission revolution sensor.

Text in Illustration
*1 O-ring


Hide 83181G 6.REMOVE SPEEDOMETER SENSOR

a.
U158306

Disconnect the speedometer sensor connector.


b.

Remove the bolt and the speedometer sensor from the automatic transaxle assembly.


c.
C117097E09
0.865,1.656 0.865,1.417 false 1.563,1.542 1.563,1.292 false 3.219,1.604 3.219,1.354 false 0.813,1.708 0.969,1.885 0.156,0.177 10 false *1 1.5,1.573 1.677,1.75 0.177,0.177 10 false *2 3.146,1.635 3.323,1.813 0.177,0.177 10 false *3

Remove the E-ring and the speedometer driven gear from the speedometer sensor.

Text in Illustration
*1 Speedometer Driven Gear
*2 O-ring
*3 E-ring


d.

Remove the O-ring from the speedometer sensor.