Home › Drivetrain › CLUTCH › CLUTCH UNIT
RM19S0E _52 Drivetrain _051467 CLUTCH _0248191 CLUTCH UNIT A

CLUTCH  CLUTCH UNIT  REMOVAL  


PROCEDURE

Hide 30300 1.REMOVE MANUAL TRANSAXLE ASSEMBLY

Hide 31204 2.REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

a.
U134426

Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transaxle assembly.


Hide 31230 3.REMOVE CLUTCH RELEASE BEARING ASSEMBLY

a.
U134427

Disengage the release bearing hub clip and remove the clutch release bearing assembly from the clutch release fork sub-assembly.


Hide 31232A 4.REMOVE RELEASE BEARING HUB CLIP

a.

Remove the release bearing hub clip from the clutch release bearing assembly.


Hide 31126 5.REMOVE CLUTCH RELEASE FORK BOOT

a.
U134589

Remove the clutch release fork boot from the manual transaxle assembly.


Hide 31236B 6.REMOVE RELEASE FORK SUPPORT

a.
C155093

Remove the release fork support from the manual transaxle assembly.


Hide 31210 7.REMOVE CLUTCH COVER ASSEMBLY

a.
C235152E01
0.534,1.36 0.691,1.508 0.157,0.148 10 *a 0.989,1.556 0.707,1.486 0.707,1.486 0.907,1.601 false

Put the matchmarks on the clutch cover assembly and the flywheel sub-assembly.

Text in Illustration
*a Matchmark


b.

Loosen the 6 bolts one turn at a time until spring tension is released.


c.

Remove the 6 bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.



Hide 31250 8.REMOVE CLUTCH DISC ASSEMBLY

a.

Remove the clutch disc assembly.

NOTICE:

Keep the lining part of the clutch disk and the surfaces of the pressure plate and flywheel free of oil and foreign matter.