84210
1.INSTALL BACK UP LIGHT SWITCH ASSEMBLY
Using SST, install the back up light switch assembly to the manual transaxle assembly with a new gasket.
Connect the back up light switch connector.
Install the 2 clamps and wire harness.
33820B
2.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
Install the control shift cable of transmission control cable assembly to the control cable bracket with a new clip B.
Install the control shift cable of transmission control cable assembly to the manual transaxle assembly with the washer and clip A.
3.INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE