Home › Drivetrain › C54 MANUAL TRANSMISSION / TRANSAXLE › BACK-UP LIGHT SWITCH
RM19S0E _52 Drivetrain _051468 C54 MANUAL TRANSMISSION / TRANSAXLE _0248198 BACK-UP LIGHT SWITCH A

C54 MANUAL TRANSMISSION / TRANSAXLE  BACK-UP LIGHT SWITCH  REMOVAL  


PROCEDURE

Hide 1.REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE

Hide 33820B 2.SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

C235550E03
2.521,1.542 2.667,1.771 0.146,0.229 10 true A 2.177,0.302 2.646,0.458 0.469,0.156 10 false B

a.

Remove the clip A and washer, and then separate the control shift cable of transmission control cable assembly from the manual transaxle assembly.


b.

Remove the clip B and separate the control shift cable of transmission control cable assembly from the control cable bracket.


Hide 84210 3.REMOVE BACK UP LIGHT SWITCH ASSEMBLY

C235551E01
1.44,1.745 1.771,1.914 0.331,0.169 10 SST 1.688,1.718 2.082,1.133 false

a.

Separate the 2 clamps and disconnect the back up light switch connector.


b.

Using SST, remove the back up light switch assembly from the manual transaxle assembly.

SST
09817-16011  


c.

Remove the gasket from the back up light switch assembly.