If a malfunction in the engine control system is detected, VSC and TRC operations are prohibited by the fail-safe function. When the signals from the engine are input normally, the fail-safe is cancelled and the DTC is not stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1201 | Engine control system malfunction signal continues for 1 second or more. | Engine control system |
Check if any engine control system DTC is output.
for 1NZ-FE (See page Engine / Hybrid System>1NZ-FE ENGINE CONTROL>1NZ-FE SFI SYSTEM>DTC CHECK / CLEAR)
for 2NZ-FE (See page Engine / Hybrid System>2NZ-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR)
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output (for 1NZ-FE) | B |
| DTC is output (for 2NZ-FE) | C |
A
B
(See pageEngine / Hybrid System>1NZ-FE ENGINE CONTROL>1NZ-FE SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
C
(See pageEngine / Hybrid System>2NZ-FE ENGINE CONTROL>SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)