Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM(for Built-in Type Yaw Rate Sensor) › from 2015.06
RM19S0E _54 Brake _051475 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0248227 VEHICLE STABILITY CONTROL SYSTEM(for Built-in Type Yaw Rate Sensor) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM(for Built-in Type Yaw Rate Sensor)  C1201  Engine Control System Malfunction  


DESCRIPTION

If a malfunction in the engine control system is detected, VSC and TRC operations are prohibited by the fail-safe function. When the signals from the engine are input normally, the fail-safe is cancelled and the DTC is not stored.

DTC Code DTC Detection Condition Trouble Area
C1201 Engine control system malfunction signal continues for 1 second or more. Engine control system

PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
a.

Check if any engine control system DTC is output.


Result
Result Proceed to
DTC is not output A
DTC is output (for 1NZ-FE) B
DTC is output (for 2NZ-FE) C



A

CHECK FOR INTERMITTENT PROBLEMS (ENGINE CONTROL SYSTEM)

B

C