83100
1.REMOVE COMBINATION METER ASSEMBLY
55606
2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
73900
3.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)
84340
4.REMOVE STOP LIGHT SWITCH ASSEMBLY
Disconnect the connector from the stop light switch assembly.
Disengage the harness clamp from the pedal support.
Turn the stop light switch counterclockwise and remove the stop light switch assembly.
47264D
5.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
Remove the brake pedal return spring.
Remove the clip and push rod pin and separate the push rod clevis from the brake pedal.
55106
6.REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for RHD)
Remove the wire harness clamp.
Remove the 4 nuts, bolt and the pedal support.