Home › Brake › BRAKE (REAR) › REAR BRAKE › 2011.08–2014.07
RM19S0E _54 Brake _051478 BRAKE (REAR) _0248247 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  INSTALLATION  


PROCEDURE

Hide 42403 1.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

Hide 2.ADJUST REAR DRUM BRAKE SHOE CLEARANCE

a.

Provisionally install the hub nuts.


b.
C233136E01
2.433,0.951 2.594,1.101 0.162,0.150 10 *1 2.41,1.033 1.744,1.033 false

Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

Text in Illustration
*1 Automatic Adjust Lever
V100135

Expand


c.
C233134E01
2.085,0.525 2.239,0.679 0.154,0.153 10 *1 2.068,0.618 1.848,0.618 1.848,0.618 1.53,1.021 false

Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.

Text in Illustration
*1 Automatic Adjust Lever
V100135

Contract

Standard:

12 notches



d.

Install the hole plug.


Hide 3.BLEED BRAKE LINE

Hide 4.BLEED CLUTCH LINE (for Manual Transaxle)

Hide 5.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)

Hide 6.ADJUST PARKING BRAKE LEVER TRAVEL

Hide 58910C 7.INSTALL REAR CONSOLE BOX ASSEMBLY